JRTFT147I01A测试程序
| 电子 › ARM › 其它 | 下载：1 | 浏览：1 | 时间：4 小时前 |
- 文件大小：288.92KB
- 运行平台：Windows
- 开发工具：C
- 下载鸟蛋：5 鸟蛋
- 说明
#include "c8051F340.h"
#include <intrins.h>
#include <absacc.h>
#include <stdlib.h>
#include <main.h>
#include <usb_api.h>
#include <mmc_sd\mmc_sd.h>
#include <lcd\lcd.h>
#include <tp\tp.h>
xdata unsigned char Packet[64]; // Last packet received from host
unsigned char f_down=0;
unsigned char f_debug=0;
unsigned char f_read=0;
unsigned char f_para=0;
unsigned char f_init=0;
unsigned char f_other=0;
unsigned char pic=0;
unsigned int bf=0;
unsigned long int sd=1;
unsigned char VerifyCode0=0xaa;
unsigned char VerifyCode1=0x55;
unsigned char VerifyCode2=0xff;
/********************************************************************************/
code const UINT USB_VID = 0x10C4;
code const UINT USB_PID = 0xEA61;
code const BYTE USB_MfrStr[] = {0x1A,0x03,'S',0,'i',0,'l',0,'i',0,'c',0,'o',0,'n',0,' ',0,'L',0,'a',0,'b',0,'s',0}; // Manufacturer String
code const BYTE USB_ProductStr[] = {0x10,0x03,'U',0,'S',0,'B',0,' ',0,'A',0,'P',0,'I',0}; // Product Desc. String
code const BYTE USB_SerialStr[] = {0x0a,0x03,'F',0,'3',0,'4',0,'0',0};
code const BYTE USB_MaxPower = 15; // Max current = 30 mA (15 * 2)
code const BYTE USB_PwAttributes = 0x80; // Bus-powered, remote wakeup not supported
code const UINT USB_bcdDevice = 0x0100; // Device release number 1.00
/*
unsigned int code Gray[32]={
0x0000,0x10a2,0x2104,0x31a6,0x4208,0x52aa,0x630c,0x7bef,
0x8c71,0x9cf3,0xad75,0xbdf7,0xce79,0xdefb,0xef7d,0xffff
};
*/
void main(void)
{
#ifdef SD_DEMO_PIC
unsigned char n;
#endif
Devices_Init();
while(KEY_STEP)
{
DispFrame();
//WaitKey();Delay(200);
Delay(500);
DispColor(WHITE);
//WaitKey();Delay(200);
Delay(200);
// DispBand();
// WaitKey();Delay(200);
// Delay(200);
// DispGrayHor16();
// WaitKey();Delay(200);
DispColor(RED);
Delay(200);
//WaitKey();Delay(200);
DispColor(GREEN);
//WaitKey();Delay(200);
Delay(200);
DispColor(BLUE);
//WaitKey();Delay(200);
Delay(200);
#ifdef SD_DEMO_PIC
for(n=0;n<2;n++)
{
DispPicFromSD(n);
//WaitKey();
Delay(200);
}
break;
#endif
Delay(200);
}
#ifdef TP_TEST
TP_DrawLine();
#endif
//DispStr("TEST END",0,0,BLACK,WHITE); //test end
//while(1);
}
//----------------------------------------------------------------------
void Delay(unsigned int dly)
{
unsigned int i,j;
for(i=0;i<dly;i++)
for(j=0;j<255;j++);
}
#ifdef AUTO_NEXT
void WaitKey(void)
{
unsigned int i;
for(i=0;i<300;i++)
{
Delay(20);
#ifdef CONN_USB
ConnToUSB();
#endif
while(!KEY_STEP);
}
}
#endif
#ifdef MANUA_NEXT
void WaitKey(void)
{
while(KEY_STEP)
{
#ifdef CONN_USB
ConnToUSB();
#endif
}
Delay(500);
while(!KEY_STEP);
}
#endif
//f_debug
//0 1 2 3 ， 4 5 6 7
//0xaa 0x55 0xff 是否显示在LCD 指令或数据 dataH dataL 显示的水平位置
//f_read
//0 1 2 3 ， 4 5 6 7 8
//0xff 0x55 0xaa 是否显示在LCD 是否有效 dataH dataL 读参数的次数 显示的水平位置
//reg_data[]={dataH,dataL,dataH,dataL,dataH,dataL... }
//f_down
//0 1 2 3 ， 4 5 6 7 ... 35 36
//0xaa 0xff 0x55 是否写入SD卡 dataH, dataL, dataH, dataL, ... dataH dataL
//f_init
//0 1 2 3 ， 4 5 6 7 ... 35 36
//0xff 0xaa 0x55 - 指令或数据 dataH dataL -
#ifdef CONN_USB
void ConnToUSB(void)
{
unsigned char i;
xdata unsigned char reg_data[24];
xdata unsigned char para_data[64];
unsigned char dat;
unsigned int reg_index;
unsigned char data_num;
unsigned char st[1]={1};
//DispStr("DEBUG FOR USB",0,0,BLACK,WHITE);
while(f_debug)
{
for(i=1;i<16;i++)
{
if(Packet[i*4]==0x00)
{
WriteComm((Packet[i*4+1]<<8)|Packet[i*4+2]);
}
else if(Packet[i*4]==0x01)
{
WriteData((Packet[i*4+1]<<8)|Packet[i*4+2]);
}
else if(Packet[i*4]==0x80)
{
//
}
}
_nop_();_nop_();_nop_();_nop_(); _nop_();_nop_();_nop_();_nop_();_nop_();_nop_();
_nop_();_nop_();_nop_();_nop_(); _nop_();_nop_();_nop_();_nop_();_nop_();_nop_();
DispStr("USB DEBUG",0,0,BLACK,WHITE);
if((Packet[3])&0x01)
{
for(i=1;i<16;i++)
{
if(Packet[i*4]==0x00)
{
DispInt((Packet[i*4+1]<<8)|Packet[i*4+2],(FONT_W*4+4)*Packet[i*4+3],(FONT_H+1)*i,GREEN,BLACK);
}
else if(Packet[i*4]==0x01)
{
DispInt((Packet[i*4+1]<<8)|Packet[i*4+2],(FONT_W*4+4)*Packet[i*4+3],(FONT_H+1)*i,BLUE,WHITE);
}
else if(Packet[i*4]==0x80)
{
//
}
}
}
_nop_();_nop_();_nop_();_nop_(); _nop_();_nop_();_nop_();_nop_();_nop_();_nop_();
_nop_();_nop_();_nop_();_nop_(); _nop_();_nop_();_nop_();_nop_();_nop_();_nop_();
f_debug=0;
}
//////////////////////////////////////////////////////
while(f_other)
{
for(i=0;i<64;i+=2)
{
CS0=0;
//RD0=1;
RS=1;
WriteDispData(Packet[i], Packet[i+1]);
CS0=1;
buffer[bf++]=Packet[i];
buffer[bf++]=Packet[i+1];
if(bf==512)
{
SD_Start();
MMC_SD_WriteSingleBlock(sd++);
buffer[0]=pic;
MMC_SD_WriteSingleBlock(0); //统计图片数量 buffer[0]=pi
bf=0;
}
}
f_other=0;
Block_Write(st, 1);
}
//////////////////////////////////////////////////////
while(f_down)
{
if(Packet[3]&&0x01) //download to sd
{
for(i=4;i<36;i+=2)
{
CS0=0;
//RD0=1;
RS=1;
WriteDispData(Packet[i], Packet[i+1]);
CS0=1;
buffer[bf++]=Packet[i];
buffer[bf++]=Packet[i+1];
if(bf==512)
{
SD_Start();
MMC_SD_WriteSingleBlock(sd++);
buffer[0]=pic;
MMC_SD_WriteSingleBlock(0);
bf=0;
}
}
f_down=0;
Block_Write(st, 1);
}
else
{
for(i=4;i<36;i+=2)
{
CS0=0;
//RD0=1;
RS=1;
WriteDispData(Packet[i], Packet[i+1]);
CS0=1;
}
f_down=0;
Block_Write(st, 1);
}
}
//////////////////////////////////////////////////////
while(f_init)
{
for(i=4;i<36;i+=4)
{
if(Packet[i]==0x00)
{
WriteComm((Packet[i+1]<<8)|Packet[i+2]);
}
else if(Packet[i]==0x01)
{
WriteData((Packet[i+1]<<8)|Packet[i+2]);
}
else if(Packet[i]==0x10)
{
//Delay(Packet[i+1]);
//Delay(Packet[i+2]);
_nop_();_nop_();_nop_();_nop_(); _nop_();_nop_();_nop_();_nop_();_nop_();_nop_();
_nop_();_nop_();_nop_();_nop_(); _nop_();_nop_();_nop_();_nop_();_nop_();_nop_();
}
else if(Packet[i]==0x80)
{
//
}
}
f_init=0;
Block_Write(st, 1);
}
//////////////////////////////////////////////////////
while(f_read)
{
for(i=0;i<24;i++)
reg_data[i]=0x00;
data_num = Packet[7]*2;
reg_index=(Packet[5]<<8)|Packet[6];
if(Packet[4]==0x01)
{
WriteComm(reg_index);
for(i=0;i<data_num;i=i+2)
{
dat=ReadData();
reg_data[i]=dat>>8;
reg_data[i+1]=dat;
}
}
f_read=0;
Block_Write(reg_data,data_num);
Delay(100);
DispStr("USB READ",0,0,BLACK,WHITE);
if((Packet[3])&0x01)
{
DispInt(reg_index,(FONT_W*4+4)*(Packet[8]),FONT_H+1,GREEN,BLACK);
for(i=0;i<data_num;i=i+2)
{
DispInt((reg_data[i]<<8)|reg_data[i+1],(FONT_W*4+4)*(Packet[8]),(FONT_H+1)*(i/2+2),BLUE,WHITE);
}
}
}
//////////////////////////////////////////////////////
while(f_para)
{
for(i=0;i<64;i++)
para_data[i]=0x00;
para_data[0]=((unsigned int)ROW)>>8;
para_data[1]= (unsigned int)ROW;
para_data[2]=((unsigned int)COL)>>8;
para_data[3]=((unsigned int)COL);
f_para=0;
Block_Write(para_data,64);
}
}
#endif
void MCU_Init(void)
{
unsigned char n;
PCA0MD &= ~0x40;
//OSC
OSCICN = 0x83; //Internal oscillator enabled, SYSCLK = Internal Oscillator = 12MHz
CLKMUL = 0x00; //Select internal oscillator as clock multiplier source clock
CLKMUL |= 0x80; //Enable clock multiplier
for(n=0;n<255;n++);
CLKMUL |= 0xC0; //Initialize the clock multiplier
while(!(CLKMUL & 0x20)); //Wait for multiplier to lock
CLKSEL = 0x00; //Change SYSCLK to (4x Multiplier ) = 48MHz (48MHz is as fast as F34 will run); 0x03;
RSTSRC |= 0x02;
//P0~P4 //set high impedance , skipped by crossbar
P0MDIN |= 0xFF; //数字输入(无模拟输入）
P0MDOUT |= 0xFF; //推挽输出（可选开漏输出，输出设为推挽，输入设为开漏）
P1MDOUT |= 0xFF;
P1MDIN |= 0xFF;
P2MDOUT |= 0xFF;
P4MDOUT |= 0xFF;
P3MDIN |= 0xFF;
P3MDOUT |= 0x17; //0001 0111
OE=0;
DIR=0;
//TP_PENIRQ = 1;
//TP_DOUT = 1;
XBR0 |= 0x02;
XBR1 |= 0x40; // Enable Crossbar
}
void SD_Start(void)
{
static unsigned char f;
if(f==0)
{
#ifdef USE_SD_INIT
SD_Init();
Delay(10);
#endif
f=1;
}
}
void Devices_Init(void)
{
//MCU
MCU_Init();
//USB
USB_Clock_Start(); // Init USB clock *before* calling USB_Init
USB_Init(USB_VID,USB_PID,USB_MfrStr,USB_ProductStr,USB_SerialStr,USB_MaxPower,USB_PwAttributes,USB_bcdDevice);
USB_Int_Enable();
//SPI
SPI0CFG = 0x70;
SPI0CN = 0x0f;
//LCM
LCD_Init();
}
void Suspend_Device(void)
{
USB_Suspend();
}
//----------------------------------------------------------------------
void USB_API_TEST_ISR(void) interrupt 17
{
unsigned char INTVAL = Get_Interrupt_Source();
if (INTVAL & RX_COMPLETE)
{
Block_Read(Packet,64);
if(Packet[0]==VerifyCode0 && Packet[1]==VerifyCode1 && Packet[2]==VerifyCode2)
{
f_debug=1;
}
else if(Packet[0]==VerifyCode2 && Packet[1]==VerifyCode1 && Packet[2]==VerifyCode0)
{
f_read=1;
}
else if(Packet[0]==VerifyCode1 && Packet[1]==VerifyCode0 && Packet[2]==VerifyCode2)
{
f_para=1;
}
else if(Packet[0]==VerifyCode0 && Packet[1]==VerifyCode2 && Packet[2]==VerifyCode1)
{
f_down=1;
}
else if(Packet[0]==VerifyCode2 && Packet[1]==VerifyCode0 && Packet[2]==VerifyCode1)
{
f_init=1;
}
else
{
f_other=1;
}
}
if (INTVAL & TX_COMPLETE)
{
}
if (INTVAL & DEV_SUSPEND)
{
Suspend_Device();
}
if (INTVAL & DEV_CONFIGURED)
{
MCU_Init();
}
if (INTVAL & DEVICE_OPEN)
{
BlockWrite(0,COL-1,0,ROW-1);
}
if (INTVAL & DEVICE_CLOSE)
{
pic=pic+1;
BlockWrite(0,COL-1,0,ROW-1);
}
}
- 目录
- 相关问题
